<!-- Empty field (Illegal field store.HeaderImageDesc) -->

(866) 444-0977

View Cart

TestimonialsContact UsHome

Characteristics of Matala Sheet and Roll Media

Characteristics of Sheet Matala

The various densities can be used in sequence or separately for unique filtration requirements. This is one of the greatest characteristics which Matala has to offer. No other media on the market can perform this step-wise filtration. Matala effectively separates large particles to small and still maintains a very aerobic and free flow of water without channeling.

Matala is slightly buoyant and will not sink to the bottom of your filter. Matala stood vertically on end will not float. Matala stacked horizontally will hold each other down.

Due to it's rigidity the Matala can be wedged in place in the filter without support.

One full sheet of Matala has the following characteristics:

  • Approximately 48" x 39" x 1.5" (120cm x 100cm x 4cm) for all densities; Black, Green, Blue and Gray
  • Weight per sheet is between 6 to 8 pounds depending on density
  • One sheet is 13 sq.ft.
  • 8 sq.ft. equals 1 cubic ft of media
  • One full sheet equals 1.6 cubic feet or 12 gallon volume
  • Semi-rigid and self-supporting
  • Specific gravity: 0.95. Slightly buoyant
  • Made of Thermopoly Propylene compound - Nontoxic to environment

(We sell Matala in both full sheet, 48 x 39 x 1.5 inches, and half sheet, 24 x 39 x 1.5 inches, sizes.)

Matala Color Biological surface area
for microbial growth
Free volume
% open space
Black 62 square feet per cubic foot 92%
Green 96 square feet per cubic foot 93%
Blue 124 square feet per cubic foot 94%
Gray 171 square feet per cubic foot 94%

 

Characteristics of Roll Matala
Rolled Matala Cartridges for Round Filter Tanks

Introducing R-Matala, the perfect "drop in" media for Vortex filters and barrel filters.

R-Matala has the same qualities as the sheets of Matala in a coiled pre-cut cartridge. Simply select the diameter roll and the density you need for your round tank and drop it in. R-Matala will naturally wedge in place without any need for support.

NO CUTTING, NO WASTE, NO HASSLE!

Four sequential densities can be perfectly employed to achieve maximum solids / biofiltration.

Each roll is 6 inches thick with a tremendous potential to trap dirt and yet is super easy to clean. Simply drain the waste out your bottom drain and gently pour pond water over the R-Matala.

The open structure of the media provides excellent flow-through without channeling. Since most round tanks are also rather tall you can stratify the R-Matala in sequential layers to make best use of the chamber.

NO DEAD ZONES, NO CHANNELING!

Seven diameters are available: 22"; 24"; 27"; 30"; 37"; 42" and 48 inch. Other diameters are available upon special request

Look no further! This is the absolute best filter media for round filter tanks! R-Matala is the only filter media MADE for Vortex Filter Systems!

  • "Drop-in" fit for a quick no hassle installation
  • High surface area per cu. ft.
  • High free volume for smooth even water flow
  • 4 densities allow step-wise transition from mechanical to biological filtration
  • A high number of interstitial spaces in the tri-dimensional matrix of the filter media improves an early and even growth of bacteria
  • Very resistant to plugging. Non-channeling
  • Easy Cleaning
  • Self supporting
  • Non-toxic to the environment; made of Thermo-polypropylene compounds
  • Light weight
  • Slightly flexible compared to sheets of Matala
  • Versatile and durable
Matala Color Biological surface area
for microbial growth
Free volume
% open space
Black 62 square feet per cubic foot 92%
Green 96 square feet per cubic foot 93%
Blue 124 square feet per cubic foot 94%
Gray 171 square feet per cubic foot 94%